How to get Bitcoin value for corresponding USD value in

Run a 0.14 Full-Node on RaspberryPi3 Pruned(less than 16GB SD needed)

Hi!
Happy if this guide helps you.
Tip if you want: 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
UPDATE 04/06/17
Add 'uacomment=UASF-SegWit-BIP148' into your bitcoin.conf if you want to signal UASF.
UPDATE 03/13/17
ADDED a tl;dr; Version at the end of this Post.
UPDATE 03/12/17:
Just to test it - I reinstalled all on 8GB SD and it works as well. But maybe you should use at least 16GB for the beginning.
Using a 128GB card for the first version was a little bit stupid - so I reinstalled everything on a 8GB SD card. Including Linux and a pruned blockchain - and it works.
I used prune=550 and Jessie Lite (headless / command line) - without wallet and gui.
The SD is almost full, but it works so far
I also updated the whole manual a bit to make things more clear. Thank you for all your feedback!
Just started my Bitcoin Node today and wanted to share the way I did it with people who are interested in running their own full node. It took some time to write everything down - hopefully correct so far.
I am sure, many people around bitcoin are way more informed and educated as I am - I am the noob. So I wrote this manual to help users like me - noobs, to get started with a cheap, simple bitcoin node on raspberry pi.
Have fun!
I wanted to get my Raspberry Pi 3 working as a node to support the network. Actually the process of installing and running the node was more or less easy - but for Noobs (like I am) it might be a bit tricky to start the whole thing, because there are different ways.
Did you - like me - think you would need +120GB on the raspi, external USB HDD to be a full node? You won't!
If you have a Raspberry and you know what Bitcoin is, I guess, you are a little bit aware of linux, networks and of course bitcoin - so I won't go into detail too much.
This guide is just a little helper to get a full node running on your raspberry pi. Thanks to the help of the nice people in this sub and of course the documentation by the developers, I got it working - and of course also special thanks to raspnode.com - as I followed their tutorial to start - I went some other ways here and there - so please read carefully.
For the Part 2 I would suggest to have http://raspnode.com/diyBitcoin.html open and read through my manual.
I split the tutorial in 2 Parts - PART ONE is about installing the client on your PC and downloading the Blockchain.
PART TWO is about the setup of the raspberryPi and transferring the pruned blockchain to the pi and run it as a full node!
The first thing to be aware of is: You actually need to download the whole blockchain to get this working - if you already have your bitcoin client synced on the PC / MAC great you can reuse it!
Now you might think "but you said less than 16GB in the title!"
Yes, but the good thing is you won't need to download it on your Raspberry, neither you need to sync it completely on your raspberry which took ages (weeks!) before. When you finished this Guide, you will just have a max. 4GB Blockchain on your Raspberry Pi - but it still is a full node! The magic word is Pruning.
Maybe even a 8GB SD Card works just fine including Linux (jessie lite)!
So, if you already have a full node on your PC - Great you can almost skip PART ONE - BUT have at how to Prune in PART ONE if you don't know about it.
For PART TWO you'll need a Raspberry Pi 2 or 3 (I used 3) min. 8GB (works also) or better 16GB SD Card. (I used a 128GB for the first version of this manual - which is way too big)

PART ONE

This is the manual how to get started on you PC / MAC / Linux (I did it on Win7)
Go to: https://bitcoin.org/en/download and download the core Client for your Machine (I used win64).
Install it and configure it to save the Blockchaindata to the directory of your choice - so instead getting 120GB on your C drive, I would suggest to download it to another place like a USB drive.
You can set this up during the install. Standard folder for the blockchain folder is "%APPDATA%\Bitcoin" on Windows.
or you can do it after the install by creating a bitcoin.conf file inside your installation folder / or %APPDATA%\Bitcoin and add
datadir=l:\yourfolder
to the file. Line by line.
By the way here you could also just add dbcache - to use more memory to speed up the process a bit:
dbcache=4096
if you don't want to use the settings inside the program. (you can also set this inside the program under settings! If you have this inside the bitcoin.conf you will see the amount you set there from inside the program - it overrides the values)
You can check inside the windows client under settings, if you can see a manual dbcache is set by having a look at the left footer area. When your dbcache value shows up, everything is fine.
So the Blockchain download process will take time - maybe a few days! Depending on your machine, internet connection and HDD.
The Blockchain is huge as it contains every single transaction of the past until today. You won't need to keep your PC running all the time, you can turn it off and on and it will resync automatically when you start bitcoin-qt.exe!
Make sure to close the client always via "quit" - ctrl+q.
After you have your bitcoin core installed, the blockchain downloaded and synced - you are ready to PRUNE!
First - close the Client and let it close smoothly. After it is really closed you can follow these steps:
By pruning, your blockchain will dramatically shrink. From 120GB to just a few GB.
Be aware, that you will lose your Downloaded Blockchain as pruning will erase a big chunk of it! If you have enough space, you could of course keep the full blockchain saved somewhere on another HDD.
You can prune by editing your bitcoin.conf file by adding:
prune=550
I used prune=1024 - not sure where the differences are right now (min. prune=550). (for my 8GB version I used 550! I suggest to use this.)
Save the bitcoind.conf file and restart your windows client.
It will now clean up the Blockchain. So just the latest blocks are saved. The client should start without any problems. Maybe it takes some time to prune the blockchain data.
Check if everything works normally (the client opens as usual, you can see an empty wallet) than close the client.
Inside the Bitcoin Folder, you'll find two folders called:
blocks chainstate
those are the interesting folders containing the important data (now pruned) - and we will transfer those two to the raspberry later!
Now you are good to start the raspi transfer explained in the next part.

PART 2

Here is what I did:
1) I installed Raspian Pixel (https://www.raspberrypi.org/downloads/raspbian/) using a 128 GB SD - which is not needed because of "Pruning" - I think a 16GB card might work, too! (You can also install Raspian Jessie Lite - which saves you even more space, as it runs headless - only command line) (Updated: It is better to use Jessie Lite to save a lot of space - when you are fine with only command line)
2) I followed partly this tutorial to get everything running and setup:
http://raspnode.com/diyBitcoin.html
Please have a look at it - I have copied the Headlines in capitals to let you know what I did, and what I skipped.
On Tutorial Page: Start with RASPBIAN (OPTIONAL) CONFIG OPTIONS.
Set You RasPi up including "EDITING FILES" to save your Layout at the tutorial page and come back here.
I skipped the CONFIGURE USB AND SET AUTOMOUNT process, as we are going to use PRUNING to reduce the 120GB to a tiny filesize - so USB Devices are not needed here!
It was necessary to ENLARGE SWAP FILE to install bitcoin core - otherwise it didn't went through which ended in a frozen raspi.
So have a close look by following the raspnode tutorial at: ENLARGE SWAP FILE.
I have my raspi running via cable to router - but you can also WiFi setup everything described under NETWORKING ON THE RASPBERRY PI.
Now comes the interesting part: Follow the steps at DOWNLOADING BITCOIN CORE DEPENDENCIES - they work fine for 0.14.0 too. Git should be on Board already when you installed Pixel - otherwise you would need to install it.
sudo apt-get install git -y (only jessy lite)
I skipped the next command lines - as I don't use bitcoin-qt wallet. If you want to use it as wallet - do the step.
mkdir ~/bin cd ~bin
Now you are in the folder you want your bitcoin core data be downloaded to via git. I didn't Downloaded the Berkeley Database source code - so I also skipped the whole next command lines
[email protected]~/bin$ wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz [email protected]~/bin$ tar -xzvf db-4.8.30.NC.tar.gz [email protected]~/bin$ cd db-4.8.30.NC/build_unix/ [email protected]~/bin/db-4.8.30.NC/build_unix$ ../dist/configure --enable-cxx [email protected]~/bin/db-4.8.30.NC/build_unix$ make -j4
and went on with "INSTALLING BITCOIN"!
I followed the first part but instead downloading 0.13 I took of course the latest version:0.14
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git cd bitcoin ./autogen.sh
this might take some time to start.
If you have trouble with hanging RESOLVING DELTAS - just restart the Raspberry Pi and remove the bitcoin folder inside /~bin using
rm -rf bitcoin
this command will delete the folder and you can reuse
git clone -b 0.14 https://github.com/bitcoin/bitcoin.git

For some reason RESOLVING DELTAS is a common problem with different downloads - so just retry it and at least after 3 times it should work!

as I didn't use the GUI/ Wallet, I ran
./configure --enable-upnp-default --disable-wallet
as I don't need the wallet functionality.
I didn't need to use "MAKE" which saves you maybe up to 2.5 hours.
instead you can just go ahead with:
sudo make install
(If I am wrong in doing so - please let me know)
The install takes some time - and just a heads up: when it gets stuck somewhere - just redo the installation process - it took three times to went through - stuck at some processing.
After the installation took place you can finally get your Raspberry Pi Node running in no time!
To test if the the installation went through - you can just start bitcoind using:
bitcoind &
than check if everything is working so far:
bitcoin-cli getinfo
after a few seconds you should see version: etc...
if not, something went wrong. Try to redo the steps in the raspnode tutorial.
(don't give up if it failed - retry! Ask your questions here)
IMPORTANT: you need to stop bitcoin on your raspberry now!
bitcoin-cli stop
If you don't need an external USB Drive - what I hope - as we are going to use pruning just go ahead and skip the USB part and create a file inside (or follow the raspnode tutorial on how to setup the USB drive):
cd .bitcoin
sudo nano bitcoin.conf
and enter the exact same pruning size you have used on your Desktop Machine to prune. I used 1024 but the minimum is 550. (used 550 for the 8GB SD card on PC and Raspberry)
prune=550
That's it for the raspi.
update: To signal UASF enter in a new line:
uacomment=UASF-SegWit-BIP148

TRANSFER

Now you have to transfer the two folders CHAINSTATE and BLOCKS from your PC bitcoind directory to your raspberry.
I am using a program called "WINSCP" - it is free and easy to use: https://winscp.net/eng/download.php
We need this to transfer the files to the Raspberry pi. Pretty sure you can also do it via SSH - but I am the noob. So let's keep it simple.
Open Winscp and put in the IP Address of your Raspberry Pi, User and Password (same as in SSH)
You should now see the directories on your Raspberry Pi. There is a folder called
.bitcoin
enter it and you will see the two folders
blocks & chainstate
you can delete them on the raspberry as they have some data from your previous test inside.
Make sure you can also see the bitcoin.conf file in that directory, which needs to contain the exact same prune line, like the one on your desktop machine. If not, make sure to edit it via SSH. The line "datadir=l:\yourfolder" is obviously not needed in the Raspberry bitcoin.conf file.
Now grab the two folders CHAINSTATE and BLOCKS from your PC and copy them to your .bitcoind folder.
I also copied banlist.dat, fee_estimation.dat, mempool.dat and peers.dat to the folder - not really knowing if needed! Not needed.
The whole copy process might take some minutes (against some weeks in the old way).
After copying is finished, you can now start bitcoind on the Raspberry.
bitcoind &
the & symbol let you still use the command line while the process is running btw.
The process - if succesfull - will take some time to finish.
bitcoin-cli getinfo
Will give you some informations what is going on right now. When you can see, that it is checking the blocks, this is good!
If you get an error - double check - if you have the correct prune size (same as on desktop machine) - in bitcoin.conf and that this file is inside .bitcoin on RaspberryPi. It took me some time, to find my mistakes.
Congrats! You are almost a part of the network!
To make your node now a fullnode, you will need to go to your router (often 192.168.1.1) and enable portforwarding for your raspberry pi - and open ports 8333 - that's it!
You can now go to: https://bitnodes.21.co/nodes/
scroll down to "JOIN THE NETWORK" and check check if your node IP is connected!
It will show up as soon as the blocks are checked and the raspi is running.
Well done!
Now you are running a full node, with a small Blockchain and got it working in Minutes, not weeks!
I really hope, my little tutorial worked for you and your are part of the Node network now.
If you have problems or I made a mistake in this helper tut, just let me know and I will try to make it better.
Have fun and NODL!
the noob
tl;dr; (if you are a real noob start with the non-tl;dr version!)
tl;dr; PART ONE
1) Download & install / setup bitcoincore @ https://bitcoin.org/de/download
2) change dbcache to something smaller than your memory and download the whole Blockchain (120GB).
3) create a file called bitcoin.conf put the line prune=550 (or higher) in to activate pruning on win inside %appData%/bitcoin
4) Open ports 8333 on your Router to make this a full node with a smaller Blockchain.
You are running a full node on your PC.
tl;dr; PART TWO
1) Install jessie lite and the needed dependencies on your SDCard - Raspberry
( >git clone -b 0.14 https://github.com/bitcoin/bitcoin.git )
  • see tutorial for more info.
2) create a file called bitcoin.conf inside .bitcoin and add the same prune=Number you had on your PC.
3) transfer the pruned folders BLOCKS and CHAINSTATE to the Raspberry Folder .bitcoin
4)Start "bitcoind &"
5) let everything sync
6) Make sure you have port 8333 opened on your router.
You are running a full node on your Raspberry with a super small Blockchain (I put all on a 8GB SDcard)
Tip if you want : 19656Uwdwko5RjtnuwQENpjBwE3ChzD59v
updated 03/12 - will update more, soon.
updated 03/12.2 - I updated the whole process a bit and also added some improvements.
updated 03/14/ Added a tl;dr version at the end.
submitted by I-am-the-noob to Bitcoin [link] [comments]

How to Mine BiblePay on Windows

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Windows Guide: 1. Download 32 or 64 bit .exe from https://www.biblepay.org/wallet/ 2. Double Click / Run .exe file and step through Install process 3. Run BiblePay 4. Click Tools >> One Click Mining, (Or set up mining manually with steps a through d below)
     a. Open File Explorer, in address bar type: %appdata%      b. Press Enter      c. Go to BiblepayEvolution folder      d. Open biblepay.conf file for editing, add lines and Save
addnode=node.biblepay.org gen=1 genproclimit=1 
NOTE: addnode is used to give the wallet a starting node to connect to and sync with gen=1 turns on mining by default when the wallet is opened genproclimit=1 sets number of mining threads to 1 by default

5. Close BiblePay and Run it again 6. In BiblePay, go to Tools menu, Click Debug Console 7. Type these commands into the debug console:
getinfo getmininginfo help 
NOTE: getinfo will show you what block number your wallet is currently on and the version number getmininginfo will show you how many threads are running and how much mining hash you have help will show you all the other commands you can use

Threads: 8. To change number of threads to use up for mining
a. Edit %appdata%/BiblepayEvolution/biblepay.conf file: Find with File Explorer or inside the wallet go to Menu >> Tools >> Open Wallet Configuration File
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with the number of threads you want to use Open Task Manager to view CPU usage)

Using the Pool:
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add (NOTE: Your Worker Username needs to be unique)
  3. Enable pool and add Worker Username in %appdata%/BiblepayEvolution/biblepay.conf file, add these lines:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
How to Withdraw Coins From Pool? The pool holds onto your coins, go to "Account" >> "Withdraw" to withdraw your coins In your BiblePay Wallet go to "File" >> "Receiving Address" and you can right click and copy the address and paste it into the Pool's Withdraw screen as the "Destination Address", then click the "Withdraw" button and the coins will be sent from the Pool to your Wallet
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws
Why use a Pool? As the network hash rises (as more miners are mining), it can take longer and longer to solve a block, by using the pool, everyone works together with all of their hash power to solve blocks, and the reward gets split between everyone who contributed based on how much they contributed in hash.
With solo mining (not using the pool) it may take 1 month to finally solve a block and get large BBP reward, with pool you can get small frequent BBP rewards every ~30 minutes. (BBP meaning BiblePay coins)

How to Update: Download exe from biblepay.org and install again, your wallet will stay intact

Backup:
Your wallet.dat stores your private keys that contain the access to your coins, this file is backed up every 24 hours in the backups folder, We also recommend that you save a copy of this file in other places, like a flash drive
Learn More about Backing Up your Wallet.dat https://www.reddit.com/BiblePay/comments/7lksp4/backup_walletdat/

FAQ
QUESTION: How long does it take for coins to mature? If you're solo mining, the coins become mature after ~100 blocks. If you're using the pool, they become mature after 24 hours
QUESTION: How do I know if I am currently mining? In your wallet >> In Top left Menu select "Tools" >> Click "Debug Console" Type in the command: getgenerate If it returns true, mining is turned on command: getmininginfo Will show how much "hashps" (hashing) your pc is doing, "genproclimit" will show how many mining threads you are using "poolmining" will be show value of true if you are successfully mining on the pool

How to Buy or Sell BBP coins?
You can buy and sell BBP coins for Bitcoin on the Exchanges we are listed on: SouthXChange: https://www.southxchange.com/Market/Book/BBP/BTC CoinExchange.io: https://www.coinexchange.io/market/BBP/BTC

Misc: Building headless Bitcoin and Bitcoin-qt on Windows https://bitcointalk.org/index.php?topic=149479.0 https://msdn.microsoft.com/en-us/commandline/wsl/install_guide https://en.wikipedia.org/wiki/Windows_Subsystem_for_Linux https://bitcointalk.org/index.php?topic=2388064.msg27133702#msg27133702 https://github.com/OleEichhorn/bitcoin-msvc

OUTDATED
Windows Mining Video Tutorial by copper101great https://www.youtube.com/watch?v=K1yKx8KsH60
submitted by togoshige to BiblePay [link] [comments]

PER DAY 5$ Earn Easy  NEW DOUBLER BITCOIN WEBsite 2020? HOW TO double Bitcoin Earn? How To Double Your Bitcoin In 2mins  HOT UPDATE New doubler site cryptob2b.cash live deposit done  new hot doubler site  doubler site 2020 NEW OLD BITCOIN DOUBLER Site 2020  HOW to GET Double BITCOIN in 24 hours? Btc Legit Doubler Software  For win/mac Bitcoin Doubler

I see no reason not to have done this in 0.13, let alone for 0.15. I want to get Bitcoin value for corresponding USD value and store it in table or variable. I got this URL from which I can get a Bitcoin value for USK amount. I searched on blockchain and I found t... "Am a novice in bitcoin, I recently purchased some bitcoins and was looking for ways to double it. Then i came across Mint capital at first i was skeptical then i invested 0.0272776 BTC and it turned 0.04642513 in a week. Am so happy" Mr. Williams Henderson - California, U.S.A Although some may argue that bitcoin itself is a scam, some of the top criminal bitcoin scams include malware, fake bitcoin exchanges and bitcoin ICO scams. and double checking sources before The bitcoin-cli utility used with the -getinfo parameter now returns a headers field with the number of downloaded block headers on the best headers chain (similar to the blocks field that is also returned) and a verificationprogress field that estimates how much of the best block chain has been synced by the local node.

[index] [22257] [19623] [30020] [22600] [1384] [21679] [29041] [26085] [27993] [16492]

PER DAY 5$ Earn Easy NEW DOUBLER BITCOIN WEBsite 2020? HOW TO double Bitcoin Earn?

Dualcoin, bitcoin doubler 2020, bitcoin hourly doubler, double your bitcoin, bitcoin double, bitcoin double 2020, dualmine, bitcoin investment site, bitcoin investment, bitcoin cloudmining, earn ... New double bitcoin site,new doubler site,double bitcoin new site,doubler site,payment proof,live deposit proof,new double site,double bitcoin,new bitcoin doubler site 2019,new double bitcoin ... PER DAY 5$ Earn Easy NEW DOUBLER BITCOIN WEBsite 2020 #HOW TO double Bitcoin Earn? Profit : 200% in 24hrs Min Invest : ️ BTC : 0.0001BTC ️ DOGE : 300 DOGE ️ LTC : 0.02 LTC ️ PM/PAYEER ... ⭐️We are happy to introduce you the newest version of Bitcoin Doubler. Our developers were working on the current project for the last 6 mounts to fix all mistakes of servers, blockchain ... bitbazo.info new doubler site 100% Double Bitcoin For 24 Hours get 200% After 1 Days Min Invest 1$ https://bitbazo.info//?ref=sofianehouaya.

Flag Counter